Australia & New Zealand

SOLUTIONS Sealers for Stone & Tile

How to seal Concrete

Silcopel

Natural Look/No Sheen Repels Water - Vertical (1-2 coats)

Consolidate

Natural Look/No Sheen Repels Water - Horizontal (1-2 coats)

Aquacryl

Natural Look/Sheen Coating - gloss or matt (2-3 coats)

Pavacryl

Wet Look/Sheen Coating - gloss or matt (2-3 coats)
 

Initial Cleaning

  • Once the concrete/pavers are laid and cured, clean with D-Scale.
  • Existing concrete should be cleaned with D-Grease. A concentrated D-Grease solution will remove most problem stains.
  • A special floor-washing machine with liquid suction will produce best results.
  • Ensure floors are rinsed thoroughly after cleaning.
     

Sealing

  • All of the above sealers can be re-sealed without stripping, if the previous sealer is in sound condition.
  • Sealers can be applied with a clean cloth, brush or lambswood applicator.
  • Ventilate well.
  • Do not allow excess Silcopel or Pristine to dry on the surface.
     

Maintenance

We recommend cleaning with warm water and a small amount of a neutral cleaner such as Natural Clean.

 

Always Test

  • Because every type of tile/paver is different we recommend that a small test area is done to ensure that the appearance and protection is satisfactory.
  • Allow sealers at least 24 hours to cure before testing.