|
Colour Chart -
Maxisil P
Colours are representative only. Please contact your local
dealer for product colour samples.
Quantity Chart
|
Depth of Joint in mm |
|
Width of Joint
in mm |
|
5 |
7 |
10 |
12 |
15 |
21 |
25 |
| 5 |
12.0 |
8.0 |
6.0 |
|
|
|
|
| 7 |
|
6.0 |
4.0 |
3.0 |
|
|
|
| 10 |
|
|
3.0 |
2.5 |
2.0 |
1.5 |
|
| 12 |
|
|
|
2.1 |
1.7 |
1.2 |
1.0 |
| 15 |
|
|
|
|
1.3 |
1.0 |
0.8 |
Metres per300/310ml cartridge
Notice: These values are approximate and serve as a rough guide for right-angled
joints. The depth of the joints is measured to the rear of the profile.
The authorised dimensions of the joints are governed by DIN 18540. Accordingly all
exterior expansion and connection joints must have a minimum width of 10mm and a maximum
width of 35mm.
Up to a width of 15mm the depth of the joint should correspond to the width. If the
width of the joint exceeds15mm, then the depth should be approx. 2/3 of its width.
Maxisil P FAQ's
Frequently Asked Questions on Maxisil P Pool specialty silicone are expected to come in
shortly. If you have any questions regarding this product you are welcome to contact a silicone dealer near you.
When is Maxisil P Pool expected to be available in the Australian
Market?
Maxisil P Pool is now currently available.
|
