Material Safety Data Sheet - Maxisil N Natural Stone Silicone
sealant
According to 91/155EC (Reviewed 01/07/2006)
1. Identification of Substance
Product details:
Trade name: MAXISIL N

Manufacturer/Supplier:
Roberts Designs
204 Boneo Road
Rosebud VIC 3939
Tel: (03) 5986 6366
Fax: (03) 5986 6680
Further information can be obtained from:
www.RobertsDesigns.com.au
In case of emergency: Tel (03) 5986 6366
2. Composition / Data on Components
Chemical Characterisation
Description: Polydimethylsiloxane, filler, auxiliaries and
oximosilane crosslinker
Dangerous components: 22984-54-9 butan-2-one
0,0'0"-(methylsilylidyne)trioxime Xn; R 21-36-43 <5%
3. Hazard Identification
Hazard description: Not applicable.
Information concerning particular hazards to man and
environment: Not applicable
Classification system: The latest edition of the EU-lists
and extended data found in company literature.
4. First Aid Measures
General information: No special measures required
After inhalation: Supply fresh air; consult doctor in case
of complaints.
After skin contact: Immediately wash with water and soap.
Rinse thoroughly.
After eye contact: Rinse opened eye for several minutes
under running water.
After swallowing: If symptoms persist consult doctor.
5. Fire fighting measures
Suitable extinguishing agents: CO2, powder or water spray.
Fight larger fires with water spray or alcohol resistant foam.
Protective equipment: No special measures required.
Accidental Release Measures
Person-related safety precautions: Not required.
Measures for environmental protection: Do not allow
product to enter sewers, surface/ground water.
Measures for cleaning/collecting: Pick up mechanically.
7. Handling and Storage
Handling
Information for safe handling in the workplace: Ensure
good ventilation and exhaustion.
Information about fire - and explosion protection: No
special measures required.
Storage
Requirements to be met by storerooms and receptacles: No
special requirements.
Information about storage in one common storage facility:
Not required.
Further information about storage conditions: Store in
cool, dry conditions and in well-sealed receptacles.
8. Exposure Controls and Personal Protection
Gear
Additional information about design of technical facilities:
No further data; see item 7 above.
Ingredients with limit values that require monitoring at the
workplace: The product does not contain any relevant quantities
of materials with critical values that have to be monitored in the
workplace.
Additional information: The lists valid during the flaking
stage were used as the basis for exposure control.
Personal protective equipment:
General protective and hygienic measures: Immediately
remove all soiled and contaminated clothing. Wash hands before
breaks and at the end of work.
Respiratory protection: Not necessary if room is well
ventilated.
Protection of hands: Protective gloves.
Eye protection: Safety glasses.
Body protection: Protective work clothing
9. Physical and Chemical Properties
Form: Pasty
Colour: According to product specification
Odour: Characteristic
Change in condition
Melting point/Melting range: Undetermined
Boiling point/Boiling range: Undetermined
Flash point: Not applicable
Self-igniting: Product is not self-igniting
Danger of explosion: Product does not represent an
explosion hazard
Density at 23°C:
ca. 1.0 g/cm3
Solubility in /Miscibility with Water:
Insoluble
10. Stability and Reactivity
Thermal decomposition / conditions to be avoided: No
decomposition when used according to specification.
Dangerous reactions: No dangerous reactions known.
Dangerous decomposition products: Under the effect of
humidity, water and protoic agents: Butanon-2-oxim
11. Toxicological Information
Acute toxicity:
Primary irritant effect:
On the skin: No irritant effect
On the eye: No irritating effect.
Sensitisation: No sensitising effects known.
Other information about experimental toxicology:
Product(s) of hydrolysis: In contact with dampness product separates
a small quantity of butanone-2-oxime (96-29-7) which irritates skin
and may cause strong irritation of mucous membranes and sensitation.
We strongly recommend to provide good ventilation of the
workplace since a small amount of a volatile, irritant substance is
released during vulcanization.
Damage to health can not be ruled out if substance is inhaled
permanently in high concentrations.
The material is odourless and completely harmless after curing.
Additional toxicological information: The product is not
subject to classification according to the calculation method of the
General EU Classification Guidelines for Preparation as issued in
the latest version.
When used and handles according to specifications the product
does not have any harmful effects to our experience and the
information provided to us.
When used and handled according to specifications the products
does not have any harmful effects. This is based on our experience
and the information provided to us.
12. Ecological Information\
General notes: Water hazard Class 1 (German Regulation -
company self assessment): slightly hazardous for water.
Do not allow undiluted product or large quantities of it to reach
ground water, water course or sewage system.
13. Disposal Consideration
Product Recommendation: Smaller quantities can be disposed
of with household waste.
European Waste Catalogue: 08 04 06 adhesives and sealants
sludge - free of halogenated solvents.
Uncleaned packaging:
Recommendation: Disposal must be made according to
official regulations.
14. Transport Information
Land transport ADRIRID (cross-border)
ADRIRID class:
Maritime transport IMDG:
IMDG Class:
Maritime pollutant: No
Air transport ICAO-TI and IATA-DGR
ICA 0/1A TA Class:
15. Regulations
Labelling according to EU guidelines: Observe the general
safety regulations when handline chemicals. The product is not
subject to identification regulations under EU Directives and the
Ordinance on Hazardous Materials.
Safety phrases:
- Keep out of the reach of children
- Avoid contact with skin
- If swallowed seek medical advice immediately and show this
container or label
- Use only in well-ventilated areas.
National regulations:
Water hazard class: Water hazard class 1 (Company
self-assessment) slightly hazardous for water.
16. Other information
This information is based on our present knowledge; however this
shall not constitute a guarantee for any specific product features
and shall not establish a legally valid contractual relationship.
|